Wholesale Solar Inverters & Lithium Batteries in Pakistan WhatsApp: +92 306 8324477
Pak Solar Shop Logo
Pak Solar ShopBest Prices in Pakistan
Dyness 10.24kWh lithium battery PowerBox G2 front product image
Lithium Battery

Dyness 10.24kWh Lithium Battery PowerBox G2

Quotation on requestVerify final specifications before ordering

Dyness 10.24kWh Lithium Battery PowerBox G2 is an all-in-one storage cabinet for larger home and light-commercial systems. This listing is for solar storage and backup systems in Pakistan. The listed configuration is 51.2V, 200Ah, 10.24kWh and LiFePO4, with cycle-life information of 8,000+ cycles. Key listed points include 10.24kWh storage at 51.2V and 200Ah; IP65 enclosure as listed; Stackable design and CAN/RS485 communication. Confirm the exact datasheet, usable energy, BMS communication and inverter compatibility before ordering.

Dyness 10.24kWh Lithium Battery PowerBox G2 is an all-in-one storage cabinet for larger home and light-commercial systems. It is intended for solar energy storage, backup power and load-management designs where the inverter and battery are correctly matched. The listed configuration is 51.2V, 200Ah, 10.24kWh LiFePO4. Final nominal versus usable energy, current limits, BMS interface and model revision should be confirmed from the manufacturer documentation.

Why consider this battery

Dyness designed the PowerBox G2 for storage projects that need a defined energy capacity and a battery-management system matched to the inverter. Its model-specific features are listed below; the final system should be sized around the actual loads, backup hours and installation environment.

  • 10.24kWh storage at 51.2V and 200Ah
  • IP65 enclosure as listed
  • Stackable design and CAN/RS485 communication

Listed technical information

  • Model: PowerBox G2
  • Listed voltage and capacity: 51.2V; 200Ah
  • Listed storage energy: 10.24kWh
  • Chemistry: LiFePO4
  • Listed cycle-life information: 8,000+ cycles
  • Warranty information in the supplied listing: 10 years; confirm the exact written terms before ordering.
  • Additional supplied key specifications: 51.2V | 200Ah | 10.24kWh | LiFePO4 | 8,000+ cycles | Warranty: 10 years

Applications

The PowerBox G2 can be considered for compatible residential, shop, office, agricultural or light-commercial solar-storage systems, depending on its output limits and the site load profile. Battery energy in kWh supports runtime planning, while voltage, charge/discharge current and inverter communications determine whether the system can operate safely.

Compatibility and installation

Before installation, confirm the exact battery voltage range, usable energy, maximum continuous and peak current, BMS communication protocol, approved inverter list, parallel or series limits, mounting requirements, protection equipment, operating temperature and commissioning procedure. Do not connect a battery to an inverter solely because the nominal voltage appears similar.

Request a quotation

Request a current quotation after the exact model, technical specifications, compatibility requirements and installation scope have been confirmed.

Related Dyness Products