Inverex Nitrox 3Kw Single Phase Hybrid Solar Inverter is a Inverex hybrid solar inverter designed for solar generation, battery storage, energy management and backup loads where the system design supports backup operation.
Product overview
it is suitable for single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits. This is a hybrid energy-management product rather than a simple PV-only inverter. It can normally route solar energy to immediate loads, charge a compatible battery, discharge stored energy later, and exchange energy with the utility grid. A hybrid title alone should not be treated as a guarantee of whole-home backup. Inverex Nitrox, Veyron II Premium, and Yukon II hybrid products span low-voltage battery systems and single- or three-phase applications. Battery voltage, PV input, EPS output, parallel capability, and waveform specifications must be confirmed by model code. For this Nitrox family; exact suffix to confirm, the exact PV voltage range, maximum DC power, MPPT count, input current, battery voltage, charge/discharge current, AC output, efficiency, EPS rating, overload behavior, communications, and parallel capability must be confirmed from the shipped datasheet. The listed single-phase architecture should be matched to the site’s supply. A high-voltage battery must not be substituted with a low-voltage pack, and a low-voltage 48V model must not be connected to a high-voltage battery bank. The product can be considered for single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits. System sizing should begin with an hourly load profile. Battery energy, expressed in kWh, determines runtime, while inverter output, expressed in kW or kVA, determines the maximum simultaneous load. Pumps, compressors, air-conditioners, elevators, welding equipment, and other high-surge loads need a starting-current review. A dedicated essential-load board is usually preferable to placing every household or commercial circuit on the backup output. Installation should include correctly rated PV and battery isolation, DC and AC overcurrent protection, surge protection, earthing and bonding where required, safe cable routing, compatible connectors, and commissioning of the battery-management communications. In.
Key features
- Rated output: 3 kW
- Phase: Single-phase
- rating: 3 kW
- Architecture: hybrid/storage inverter
- confirm low-voltage versus high-voltage battery interface
- PV input, MPPT count, EPS/backup output, overload behavior, and parallel capability: model-specific and must be confirmed
- Monitoring: confirm included Wi-Fi/LAN/4G or data logger
Applications
Single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits.
Compatibility and installation
Confirm the exact model, electrical ratings, PV or battery limits, communications, protection equipment, grid requirements and final manufacturer documentation before installation.
Request a quotation
Request a quotation after confirming the exact model, system design, compatibility requirements and installation scope.
