ITEL 10.24kWh IP20 Lithium Ion Battery 51.2V 200Ah is a itel Energy lithium battery for solar energy storage designed for storing surplus solar energy for later use, solar self-consumption and selected backup loads when paired with a compatible inverter.
Product overview
it is suitable for solar self-consumption, evening energy shifting, selected backup loads, telecom/ups-style reserve, and modular storage where the compatible inverter supports the It stores electrical energy for later use. In a solar installation, a compatible inverter can charge the battery from surplus photovoltaic production and discharge it when solar generation is low or when selected backup loads need support. Actual delivered energy depends on the permitted depth of discharge, temperature, charge/discharge power, inverter losses, reserve settings, battery age, and the BMS operating limits. A battery with a large kWh rating does not automatically provide a high kW output; power capability must be checked separately. Battery architecture and installation are model-specific. itel Energy’s official site describes LiFePO4 batteries with intelligent BMS, high discharge capability, safety protection, and product-specific IP20 fan or natural cooling. The quoted voltage, capacity, and IP rating should be checked against the physical nameplate and current datasheet. For lithium products, confirm whether the chemistry is LiFePO4/LFP, the number of cells or modules, maximum continuous and peak current, operating-temperature range, cycle or warranty conditions, and BMS communication protocol. For lead-acid, tubular, maintenance-free, or motorcycle products, confirm charging profile, ventilation, orientation, float requirements, and whether the product is intended for deep-cycle solar use. Do not connect a battery to an inverter merely because the voltage appears similar. For a solar-storage system, the right application depends on the load profile. A modest battery can support lights, fans, networking equipment, security, refrigeration, and electronics; pumps, compressors, air-conditioners, heaters, and other motor or resistive loads may require a higher power rating or a dedicated backup design. The installer should calculate hourly energy demand, expected outage duration, battery reserve, and the maximum simultaneous load. If the battery is part of a larger bank, confirm approved parallel or series configurations, equal module generation, communication wiring.
Key features
- Nominal energy: 10.24 kWh
- Voltage and capacity: 51.2 V; 200 Ah
- Protection rating: IP20
Applications
Solar self-consumption, evening energy shifting, selected backup loads, telecom/UPS-style reserve, and modular storage where the compatible inverter supports the
Compatibility and installation
Confirm nominal versus usable energy, chemistry, BMS, voltage range, and compatible inverter
Request a quotation
Request a quotation after confirming the exact model, system design, compatibility requirements and installation scope.
