Solis 8kW LV Single Phase Hybrid Solar Inverter (S6-EH1P8K-L-PLUS) is a Solis hybrid solar inverter designed for solar generation, battery storage, energy management and backup loads where the system design supports backup operation.
Product overview
it is suitable for single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits. This is a hybrid energy-management product rather than a simple PV-only inverter. It can normally route solar energy to immediate loads, charge a compatible battery, discharge stored energy later, and exchange energy with the utility grid. A hybrid title alone should not be treated as a guarantee of whole-home backup. Solis official documentation distinguishes low-voltage single-phase, low-voltage three-phase, and high-voltage three-phase energy-storage inverters. S6-EH1P(3–10)K-L-PLUS is a low-voltage single-phase family; S6-EH3P families cover low- and high-voltage three-phase systems. Model suffix controls battery voltage, backup, generator compatibility, and overload behavior. For this Solis S6-EH1P low-voltage single-phase family; exact suffix to confirm, the exact PV voltage range, maximum DC power, MPPT count, input current, battery voltage, charge/discharge current, AC output, efficiency, EPS rating, overload behavior, communications, and parallel capability must be confirmed from the shipped datasheet. The listed single-phase architecture should be matched to the site’s supply. A high-voltage battery must not be substituted with a low-voltage pack, and a low-voltage 48V model must not be connected to a high-voltage battery bank. The product can be considered for single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits. System sizing should begin with an hourly load profile. Battery energy, expressed in kWh, determines runtime, while inverter output, expressed in kW or kVA, determines the maximum simultaneous load. Pumps, compressors, air-conditioners, elevators, welding equipment, and other high-surge loads need a starting-current review. A dedicated essential-load board is usually preferable to placing every household or commercial circuit on the backup output. Installation should include correctly rated PV and battery isolation, DC and AC overcurrent protection, surge protection, earthing.
Key features
- Rated output: 8 kW
- Phase: Single-phase
- rating: 8 kW
- Architecture: hybrid/storage inverter
- confirm low-voltage versus high-voltage battery interface
- PV input, MPPT count, EPS/backup output, overload behavior, and parallel capability: model-specific and must be confirmed
- Monitoring: confirm included Wi-Fi/LAN/4G or data logger
Applications
Single-phase homes, shops, offices, and small commercial sites requiring solar generation, battery storage, load shifting, and selected backup circuits.
Compatibility and installation
Confirm the exact model, electrical ratings, PV or battery limits, communications, protection equipment, grid requirements and final manufacturer documentation before installation.
Request a quotation
Request a quotation after confirming the exact model, system design, compatibility requirements and installation scope.