Dyness 7.68kWh Lithium Battery BX51150 is a higher-capacity 7.68kWh low-voltage storage cabinet. It is intended for solar energy storage, backup power and load-management designs where the inverter and battery are correctly matched. The listed configuration is 51.2V, 150Ah, 7.68kWh LiFePO4. Final nominal versus usable energy, current limits, BMS interface and model revision should be confirmed from the manufacturer documentation.
Why consider this battery
Dyness designed the BX51150 for storage projects that need a defined energy capacity and a battery-management system matched to the inverter. Its model-specific features are listed below; the final system should be sized around the actual loads, backup hours and installation environment.
- 7.68kWh storage at 51.2V and 150Ah
- Integrated battery-management system
- CAN/RS485 communication and expansion support
Listed technical information
- Model: BX51150
- Listed voltage and capacity: 51.2V; 150Ah
- Listed storage energy: 7.68kWh
- Chemistry: LiFePO4
- Listed cycle-life information: 6,000+ cycles
- Warranty information in the supplied listing: 5-10 years (dealer dependent); confirm the exact written terms before ordering.
- Additional supplied key specifications: 51.2V | 150Ah | 7.68kWh | LiFePO4 | 6,000+ cycles | Warranty: 5-10 years (dealer dependent)
Applications
The BX51150 can be considered for compatible residential, shop, office, agricultural or light-commercial solar-storage systems, depending on its output limits and the site load profile. Battery energy in kWh supports runtime planning, while voltage, charge/discharge current and inverter communications determine whether the system can operate safely.
Compatibility and installation
Before installation, confirm the exact battery voltage range, usable energy, maximum continuous and peak current, BMS communication protocol, approved inverter list, parallel or series limits, mounting requirements, protection equipment, operating temperature and commissioning procedure. Do not connect a battery to an inverter solely because the nominal voltage appears similar.
Request a quotation
Request a current quotation after the exact model, technical specifications, compatibility requirements and installation scope have been confirmed.
