Wholesale Solar Inverters & Lithium Batteries in Pakistan WhatsApp: +92 306 8324477
Pak Solar Shop Logo
Pak Solar ShopBest Prices in Pakistan
Dyness 5.12kWh lithium battery DL5.0C Pro front view
Lithium Battery

Dyness 5.12kWh Lithium Battery DL5.0C Pro

Quotation on requestVerify final specifications before ordering

Dyness 5.12kWh Lithium Battery DL5.0C Pro is an upgraded 5kWh-class low-voltage module in the DL series. This listing is for solar storage and backup systems in Pakistan. The listed configuration is 51.2V, 100Ah, 5.12kWh and LiFePO4, with cycle-life information of 8,000 cycles. Key listed points include 5.12kWh LiFePO4 storage; Listed 8,000-cycle specification; CAN/RS485 communication for compatible inverter systems. Confirm the exact datasheet, usable energy, BMS communication and inverter compatibility before ordering.

Dyness 5.12kWh Lithium Battery DL5.0C Pro is an upgraded 5kWh-class low-voltage module in the DL series. It is intended for solar energy storage, backup power and load-management designs where the inverter and battery are correctly matched. The listed configuration is 51.2V, 100Ah, 5.12kWh LiFePO4. Final nominal versus usable energy, current limits, BMS interface and model revision should be confirmed from the manufacturer documentation.

Why consider this battery

Dyness designed the DL5.0C Pro for storage projects that need a defined energy capacity and a battery-management system matched to the inverter. Its model-specific features are listed below; the final system should be sized around the actual loads, backup hours and installation environment.

  • 5.12kWh LiFePO4 storage
  • Listed 8,000-cycle specification
  • CAN/RS485 communication for compatible inverter systems

Listed technical information

  • Model: DL5.0C Pro
  • Listed voltage and capacity: 51.2V; 100Ah
  • Listed storage energy: 5.12kWh
  • Chemistry: LiFePO4
  • Listed cycle-life information: 8,000 cycles
  • Warranty information in the supplied listing: 10 years; confirm the exact written terms before ordering.
  • Additional supplied key specifications: 51.2V | 100Ah | 5.12kWh | LiFePO4 | 8,000 cycles | Warranty: 10 years

Applications

The DL5.0C Pro can be considered for compatible residential, shop, office, agricultural or light-commercial solar-storage systems, depending on its output limits and the site load profile. Battery energy in kWh supports runtime planning, while voltage, charge/discharge current and inverter communications determine whether the system can operate safely.

Compatibility and installation

Before installation, confirm the exact battery voltage range, usable energy, maximum continuous and peak current, BMS communication protocol, approved inverter list, parallel or series limits, mounting requirements, protection equipment, operating temperature and commissioning procedure. Do not connect a battery to an inverter solely because the nominal voltage appears similar.

Request a quotation

Request a current quotation after the exact model, technical specifications, compatibility requirements and installation scope have been confirmed.

Related Dyness Products